Wire Mesh Fabric Hot Dipped Galvanised after Weld
Quick View
Wire mesh manufactured through the processing of Hot Dipped Galvanized After Weld (GAW) is strong and durable. These products are made by dipping previously welded mesh into a bath of molten zinc. The entire fence or mesh, including the welded areas, is thoroughly sealed and protected against rust and corrosion. GAW mesh is made of steel wire without pre galvanizing layer. Can be further coated with chemical powder.
Covered with melt zinc coating layer on the surface, the GAW mesh sheet will last longer time than GBW galvanized before welded wire mesh. The products are available in a wide variety of gauges and mesh sizes. These determine the final use of the product.
Features and Uses
Hot Dipped Galvanised Wire Mesh enjoys the feature of corrosion resistance compared with plain welded wire mesh. Mainly used as fencing panels or further fabricated into wire products (partitions, wire container, wire baskets, etc) and stucco netting products.
Square or rectangular opening. Usually made of plain steel wire by spot welding to form a firm structure and flat surface.
10x10 gaw welded wire mesh rolls for wall reinforcing, building material
The concrete wall embedded with welded wire stucco joint fabric, then plastered.
Processing:
Low carbon steel wire arranged in lines and spot welded to flat structure, and then cold-plating (plating), hot dip, PVC plastic coating surface passivation. The mesh panels offer surface smooth, uniform mesh, good performance, stability, anti-corrosion, anti-corrosion resistance.
Black Vinyl Coated HDG Square Wire Mesh Cloth 16 gauge,
1/2" x 1/2" Square Hole
GAW Mesh Panel, square holes 25mm x 25mm, BWG21, 0.58 m width x 45 m length
| Specification of Hot Dipped Galvanized Welded Mesh Sheet and Rolls | |||
| Opining | Wire Diameter | ||
| Inch | mm | BWG | mm |
| 1"x1" | 25mmx25mm | 14#-11# | 2.0mm-3mm |
| 2"x1" | 50mmx50mm | 14#-8# | 2.0mm-4mm |
| 2"x2" | 50mmx50mm | 14#-8# | 2.0mm-4mm |
| 3"x2" | 75mmx50mm | 14#-6# | 2.0mm-5mm |
| 3"x3" | 75mmx75mm | 14#-6# | 2.0mm-5mm |
| 4"x2" | 100mmx50mm | 14#-4# | 2.0mm-6mm |
| 4"x4" | 100mmx100mm | 14#-4# | 2.0mm-6mm |
| 5"x5" | 125mmx125mm | 14#-4# | 2.0mm-6mm |
| 6"x6" | 150mmx150mm | 14#-4# | 2.0mm-6mm |
| Note: Special specifications can be customized. | |||
We use CNC automatic machine for quality products.
Considering setting up a factory? Click here. Welcome to contact us with your specific requirements.